You know, if the cooling speed of silicone oil becomes faster, some deterioration of the product can be reduced, thereby extending the service life. Even so, many times we will find that its cooling speed is very slow, so how can we improve it?
   1. The operation mode of water quenching and oil cooling is adopted, that is, water is released at high temperature and oil is released at low temperature, which is equivalent to slow cooling of the oil with water, but this requires experience and is more suitable for single-person operation.
  2. Choose low-viscosity silicone oil and keep it at a suitable temperature. It cannot be too low, so that the viscosity is high, nor too high, so that the temperature is high and the cooling is slow.
  3. By adjusting the concentration, the cooling speed can be adjusted to avoid cracking caused by water cooling too fast. Silicone oil will not become hard if it is cooled too slowly, which means that an intermediate value can be taken.
  4. Introducing dehydrated compressed air into silicone oil to stir the oil can speed up cooling. Appropriately increasing the cooling rate of silicone oil can save time and enhance its conductivity.

Methyl highly hydrogenated silicone oil IOTA 202