How to bond high temperature resistant silicone sealing strip? Rubber Sealstrip (RubberSealstrip) has been applied to various industries such as automobiles, doors and windows, cabinets, refrigerators, and containers. Widely used in sealing industries such as electronics, lighting, pharmaceuticals, chemicals, mechanical equipment, textiles and chemical fibers, and automobiles.
The sealing strip can be bonded and then formed into an O-ring. This type is convenient for assembly on some machines. If there is no bonding, then the assembler can only handle it with scissors and stick it. This is very It is inconvenient to operate and easy to break! It will be very convenient if it is used directly after dipping a circle before.


     Regarding the bonding of silicone sealing strips, there are special bonding machines that melt at high temperatures to form bonding. The glue used has a very good bonding effect! According to the size of the end face, the withstand relay force is about 1-10KG. Therefore, the silicone sealing strip can be bonded and is very firm!


     So how to bond the high temperature resistant silicone sealing strip? The high temperature resistant silicone sealing strip can use RTV silicone glue, and the bonding method only needs 3 steps:


     1. Clean the surface of the silicone sealing strip to be bonded with alcohol. If the other end is made of metal or other materials, it is also necessary to clean the dust and oil, and dry it for use;


     2. Apply KN-300 glue on any side of the bonding, as evenly as possible, and control the thickness below 1mm;


     3. Appropriately apply pressure for bonding in the first 30 minutes. If the condition is OK, apply pressure for 24 hours until the glue is completely cured. It is suitable for bonding high temperature resistant silicone sealing strips to each other, or silicone sealing strips for bonding stainless steel, iron plate, aluminum alloy and other metal materials.

About silicone foam, please check the details:
https://www.siliconefoam.net/product-medium-firm-silicone-foam-iota-ht-800-.html