LSRs are usually sold as two-component components in mixing ratios ranging from 1:1 to 10:1. .

Laboratory tests have shown that LSR can be mixed with a mixer or by hand in the laboratory. The content of inhibitors in the formula affects the service life of LSR after opening the package. In order to avoid air entering and producing air bubbles, the mixture must be stored in vacuum before use.

In production units, metering agitators should be preferred over power agitators, which may generate excessive heat or cause additive separation.

How to use liquid silicone rubber:

• Can use conventional coating equipment

• For thicker coatings use a roller

• Thinner coatings (>40 g/m2) use air or rotogravure

• Addition of solvent allows for thinner coatings

• Can also be used for screen printing

About liquid silicone rubber, please check the details:
https://www.siliconefoam.net/product-iota-f663a,b-liquid-silicone-rubber-foam-.html