1. Platinum vulcanizing agent has single and double components:

     1. One-component platinum vulcanizing agent is simple and convenient to operate. It is a one-component platinum addition type silicone vulcanizing agent. It is mainly used for low-temperature vulcanization and products requiring odorless molded, extruded or calendered silicone products. It is more convenient to operate and use.

     2. The two-component platinum vulcanizing agent is composed of two components, A and B, which must be added separately when used, and processed according to the actual molding process.


Two, the same point:

         Both one-component platinum vulcanizing agent and two-component platinum vulcanizing agent are new catalysts used to meet the low temperature and odorless requirements of silica gel vulcanization. The addition ratio is small, the vulcanization speed is fast, and the silica gel products are in compliance with ROHS and FDA. , LFGB, VOC and other environmental testing requirements, safe and non-toxic, but not in the mouth or eyes.


     The storage conditions are different: the single-component platinum vulcanizing agent needs to be stored in a refrigerated seal, and the two-component platinum vulcanizing agent should be stored sealed and protected from light at room temperature or low temperature.

About platinum catalyst, please check the details:
https://www.siliconefoam.net/product-platinum-catalyst-.html