Cooling the silicone oil can reduce the deterioration of the product and prolong the use time, but sometimes it is found that the cooling speed is very slow, how to increase the cooling speed?
1. Adopt the operation method of water quenching and oil cooling, that is, put water in high temperature, and put oil in low temperature, which is equivalent to using water to adjust the slow cooling of oil, but this requires experience, and it is more suitable for single-piece operation.
2. Choose low-viscosity silicone oil and keep it at an appropriate temperature. It can't be too low, so the viscosity is high, and it can't be too high, so the temperature is high and the cooling is slow.
3. By adjusting the concentration, the cooling speed can be adjusted to avoid water cooling too fast and cracking, and silicone oil cooling too slow and not hard, that is to say, an intermediate value can be taken.
4. Pass the compressed air after water removal into the silicone oil to stir the oil to speed up the cooling.
Appropriately increasing the cooling rate of silicone oil can save time and enhance its conductivity.


About silicone oil, please check the details:
https://www.siliconefoam.net/product-hydroxyl-silicone-oil-for-fumed-silica-iota-1203d-.html