Manufacturers of silicone oil will share with you the use of silicone oil and the use of surface treatment agents in the current industry. Don't miss it!
1. After the glass windows of automobiles, airplanes, ships, etc. are treated with silicone oil, a very thin layer of hydrophobic film can be formed, which can reduce dust contamination and can transmit 100% light. It will not be damaged by rain, fog or sudden drop in temperature. The surface condenses water vapor or forms fog, but forms water droplets to roll away from the glass surface, ensuring sightlines and safe operation. The easiest treatment method is to dissolve silicone oil in isopropanol or toluene to make a solution with a concentration of 4%, and use brushing or spraying to treat the glass surface. After the solvent goes out, a layer of silicone oil film will be formed, which can generally last for one to several days. moon.
2. Ceramics have good insulation properties and are widely used in radio components, electricity, communications, trams, etc., but they are easily affected by water, steam, and fog, and the insulation is significantly reduced, which can be overcome by using silicone oil treatment This shortcoming. The method is to clean the ceramic surface first, after drying at 105°C, dip or spray with 1% silicone oil solution, and finally heat treatment above 150°C to obtain a satisfactory moisture-proof effect.
3. Silicone oil manufacturers believe that the paper will have good water repellency after drying with 0.001% to 3% silicone oil solution. Kraft paper, cellophane, Dowling paper, etc. are coated with about 5% silicone oil water emulsion, and after drying at 110°C to 140°C, the adhesiveness of the paper can be reduced, and it can be used as pressure-sensitive adhesive release paper and packaging stickiness Matter and hydrophobic prints.
4. After the leather is treated with silicone oil, it is impervious to water, but it does not affect the air permeability and moisture permeability, which can prolong the service life of the leather. The tensile strength of the treated upper leather can be increased by 11% to 14%, the wear resistance is also significantly improved, and the wearability can also be improved.
5. After the building materials are treated with silicone oil, their wind erosion resistance and water repellency can be improved. Adding 0.1% to 0.15% (mass fraction) or silicone oil emulsion with a higher solid content in the mortar can show the above characteristics and improve the ease and fluidity of the mortar. Asbestos, cement, gypsum board, etc. can also be treated with silicone oil.
6. After the metal surface is treated with silicone oil, it can also achieve the purposes of waterproof, anti-corrosion and anti-frost.
7. Fabric finishing Cotton, wool, silk, rayon, synthetic fiber and glass fiber are treated with silicone oil


About silicone oil, please check the details:
https://www.siliconefoam.net/product-hydroxyl-blocking-polymethyl-silicone-oil-(general-type)-iota-1203-.html