Foamed silica gel is an environmentally friendly material. Like silica gel, it is also called addition-type silica gel because it is an extended product of silica gel. It can completely reach food-grade certification products. Foamed silica gel is made of silica gel and curing agent at a ratio of 1:1. The products produced are safe and environmentally friendly, and the finished products are non-toxic and tasteless. The fireproof temperature can reach 94v to 0. The range of temperature resistance of silicone foam products is the same as that of silicone products, from -40 to 220 Between ℃, the tear strength is as high as 55Kn/m, and the ductility can reach 100.

In order to ensure the quality of the produced products, please remember to operate according to the construction requirements to avoid unnecessary quality problems. Is there any trick to the normal operation method of foamed silicone? we can take a look together

The specific operation method is as follows:

1. The normal working temperature of foamed silica gel is between 5~35°C. If we are working at low temperature, please put the product to be produced into warm water at 25~30°C in advance, and take it out after 5 minutes. out, which can increase the temperature of the tank without causing processing problems.

2. Do not directly contact with open flame and overheating.

3. Remember to clean the surface, otherwise it will affect the bonding effect of the foamed silicone.

4. Please spray a small amount of water before operation to increase the humidity of the environment.



About foamed silicone, please check the details:
https://www.siliconefoam.net/product-iota-f663a,b-liquid-silicone-rubber-foam-.html