The silica gel foam board should introduce foreign foaming technology, the foaming is uniform, the density can be 0.25-0.85g/cm3, and the Shore hardness is 8-30A. Environmentally friendly, non-toxic, odorless, good resilience, good flexibility, no bubbles and pores on the surface.

1. This product has excellent heat air aging resistance, ozone resistance, insulation, fuel oil and lubricating oil resistance, and can work in air or oil medium at a temperature of -60~+250°C.

2. Strong sealing ability, which can effectively prevent tiny particles and drifting rain.

3. Sealing, dust-proof, moisture-proof, air-tight and light-shielding, vibration isolation, fireproof

4. Vibration isolation used in electronic equipment and vehicles

5. Available for punching various sealing gaskets and backing plates with strict requirements

In the late 1970s, rubber and plastic insulation materials were used in building energy conservation in some developed countries abroad, and the construction industry was forced to implement energy-saving standards in new buildings to use rubber and plastic insulation materials. Rubber and plastic insulation materials are used in developed countries. These countries have achieved great results, and the energy consumption of buildings has dropped significantly. For example, after Denmark used rubber and plastic insulation materials, the heating area increased by 30% in 1985 compared with 1972, but the heating energy consumption was reduced by 3.18 million tons of standard coal. It can be seen that foreign building energy-saving regulations have achieved significant progress over the past 30 years. social and economic benefits.

Rubber and plastic insulation materials are elastic closed-cell elastic materials, which have excellent properties such as softness, bending resistance, cold resistance, heat resistance, flame retardant, waterproof, low thermal conductivity, shock absorption, and sound absorption. They can be widely used in central air conditioning, construction, and chemical industry. , Textile, metallurgy, communication, vehicles, electrical appliances and other industries and parts of various types of hot and cold medium pipes, containers, can achieve the effect of reducing cold loss and heat loss. In addition, the construction is simple, the appearance is neat and beautiful, and the product does not contain fiber dust, and will not breed any harmful substances such as mold, so it is a high-quality cross-century new generation of thermal insulation material.

The promulgation and implementation of rubber and plastic insulation materials and products and energy-saving regulations are the influencing factors affecting building energy conservation, involving a huge industrial group. The development and application of building rubber and plastic insulation materials have attracted more and more attention from all over the world. New rubber and plastic insulation Materials are constantly emerging. From the perspective of the materials and varieties of building rubber and plastic insulation materials, the research on rubber and plastic insulation materials with polystyrene as the main raw material is relatively extensive at home and abroad, but most of them are in the field of boards, such as polystyrene boards and steel wire grids. Sandwich composite interior and exterior wall panels, metal composite sandwich panels, etc. Although polystyrene board has a good thermal insulation effect in use as a rubber and plastic insulation material, due to the characteristics of the board, when the polystyrene board is connected to the main body during construction, it is mainly point-fixed and surface-fixed as a supplement. Necessary splicing and bonding are not suitable for thermal insulation of buildings with complex shapes. The construction process is complicated and the overall cost is high. At the same time, because the hydrophobicity of polystyrene board is not suitable for conventional hydrophilic materials, it is difficult to guarantee the quality of subsequent construction other than the surface layer, and it is prone to quality problems such as cracking, falling off, and hollowing of the surface layer mortar, which is harmful to the building. The use or construction of exterior decoration such as facing bricks and paints constitutes a great constraint. Unshaped slurry rubber-plastic thermal insulation materials can overcome these deficiencies of boards, so it constitutes an important part of building thermal insulation materials. Developed countries such as Europe and the United States started earlier in the research and application of slurry rubber and plastic insulation materials, and the technology is relatively mature, and has achieved great results in research and application.

About silicone foam, please check the details:
https://www.siliconefoam.net/product-firm-cellular-silicone-iota-ht-820-.html